CL_RFC2782_SRV_type - SRV type in standard query
Verify that a NUT transmits correct standard query format for SRV type
Client
CL_RFC2782_SRV_type.seq [-tooloption ...]: KOI tool option
See also DNSConfig.pm
AP Server1(TN):A.example.com DNS Server1(TN)
|3ffe:501:ffff:101::10 |3ffe:501:ffff:101::20
|192.168.1.10 |192.168.1.20
| |
Net-y --+--------+-----------------------+-------- 3ffe:501:ffff:101::/64
| 192.168.1/24
|
|
ROUTER1(TN)
|3ffe:501:ffff:100::1
|192.168.0.1
|
Net-z --+--------+-------------------------------- 3ffe:501:ffff:100::/64
| 192.168.0/24
DNS Client1(NUT)
3ffe:501:ffff:100:XXXX
192.168.0.10
XXXX: EUI64 address
Setup
Set the DNS Server1(TN)'s address on NUT as above mentioned Network Topology.
Pre-Sequence
In order to send the query for SRV type of _http._tcp.example.com. to the DNS Server1(TN),
NUT is configured.
This test sequence is following.
DNS Client1 (NUT) DNS Server1 (TN)
| |
|--------------------------------------------->|
| 1. Send standard query |
| |
v v
1. NUT send standard query to TN.
Judgment (Check *1)
Packet Description
|
1. Standard query from DNS Client1 (NUT) to DNS Server1 (TN)
|
| IP Header |
Source Address |
NUT_NETZ |
| Destination Address |
SV_NETY |
| UDP Header |
Src Port |
any |
| Dst Port |
53 |
| DNS Header |
ID |
any |
| QR |
0 |
| OPCODE |
0 |
| AA |
any |
| TC |
0 |
| RD |
any |
| RA |
any |
| Z |
any |
| RCODE |
any |
| QDCOUNT |
1 |
| ANCOUNT |
0 |
| NSCOUNT |
0 |
| ARCOUNT |
any |
| DNS Question section |
QNAME |
_http._tcp.example.com. |
| QTYPE |
SRV (0x0021) |
| QCLASS |
any |
NUT_NETZ : DNS Client1(NUT)'s address
SV_NETY : DNS Server1(TN)'s address
1. Standard query for SRV type must be based on above Verification Points.
If NUT has cache function, clear the cache.
RFC2782 DNS SRV RR